8" 4 Jaw Self Centering Lathe Chuck + TIR Certificate + D1-6 Back Plate New R[

Description

SHARS 8" 4 Jaw Self Centering Lathe Chucks with TIR Certificate + D1-6 Back Plate New
For back plate you would not need to drill any mounting holes but you will need to turn the shoulder D1 down .040" to match the back of the lathe chuck to make the chuck & back plate more concentric with the lathe spindle and reach chuck's TIR
Each high quality chuck comes with a
certification
that documents
TIR
.
Product Code
202-5474+202-6155
Chuck description
Chuck diameter: 8"
Thickness: 2.95"
Center hole: 2.56"
Bolt Circle Diameter: 7.087"
Runout: 0.0039"
Max. Input Torque: 250 Nm
Product features
Semi-steel chuck body made from high quality cast iron
Each pinion is ground and hardened to HRC 43
Both sides of the jaw teeth and guides are ground and hardened to HRC 58-62
Each set of jaws are serialized in their own set
A serialized set of jaws are then finished, ground, and lapped on their designated chuck body which will be the same chuck body on the final assembly to achieve a greater accuracy
Before assembling the jaws to its designated chuck body, the jaws finish machining is performed on a close tolerance state of the art CNC machine from Japan
The scroll plate's thread flank are ground on both sides to achieve tighter contact with the master jaw
Each chuck has gone through rigorous accuracy and repeatability inspection by clamping and jamming multiple random testing rods or rings
Accuracy is maintained for the entire clamping range
Clamping Range:
Internal Jaws:
Clamping Range: A-A1  0.157-3.346"
Jamming Range: B-B1   2.559-7.874"
External Jaws:
Clamping Range: C-C1 2.559-7.874"
size (inch)
D (inch)
D1 (inch)
D2 Mounting Hole Bolt Circle Dia (inch)
D3 (inch)
H (inch)
H1 (inch)
h (inch)
z-d (metric)
8
7.874
6.496
7.087
2.559
4.291
2.653
0.197
3M-10
Product includes
2 set of jaws: inside jaw set and outside jaw set
3 piece of mounting screws for the lathe chuck back plate
1 hexagon wrench
8" Back Plate Description:
Diameter: 8"
Taper: D1-6
Diameter Of Stud: 7/8"
Studs Included:  6
Shoulder Diameter: 6.496"
Bolt Circle Diameter: 7.087"
This machined back plate is designed to mount onto our 8" 3 jaw or 4 jaw self centering lathe chuck (p/n 202-5434, 202-6189, 202-5412, 202-5474). The
mounting holes to mount the back plate to the chuck are drilled and tapped, and the registration (shoulder) needs to be slightly turn down to match the
recess on the back of the lathe chuck.
If your chuck has 3-M10 and D2=7.087", this back plate will fit your chuck.
Product features
Made from high grade cast iron
Fits most 8" self centering plain back chuck (please verify the bolt circle diameter and shoulder diameter on the back of the lathe chuck)
How to process back plate to guarantee Chuck's T.I.R?
The fully-machined chuck back plates can be mounted onto 8" 3 jaw or 4 jaw self centering lathe chuck (p/n 202-5412, 202-5434, 202-5474, 202-6189).
All
back plates have 0.04" allowance, please measure the size of Chuck's D1 before process your back plates. The size of back plates's D1 should be a little
bit smaller than the size of Chuck's D1. Because the gap between back plate and chuck is smaller, chuck's TIR is better. No gap is the best.
You would not need to drill any mounting holes but you will need to turn the shoulder down .040" to match the back of the lathe chuck to make the chuck &
back plate more concentric with the lathe spindle. When turning the shoulder of the backing plate, ONLY TURN THE SHOULDER OF THE BACKING
PLATE WHEN ATTACHED TO THE LATHE SPINDLE. If you use a chuck to clamp the backing plate and then turn it, the backing plate will not be true
to the lathe spindle and will have more runout than specified when the chuck and back plate are put together.
Product includes
6 pcs of studs for mounting into the cam lock on lathe spindle
We have other chucks & back plates available at
My Ebay Store
:
Related products
8" Fully Machined Threaded Back Plate with 1-1/2 x 8 TPI for 3 or 4 Jaw Self Centering Lathe Chucks
p/n: 202-
6201
8" Fully Machined Threaded Back Plate with 2-1/4 x 8 TPI For 3 or 4 Jaw Self-Center Chuck
p/n:
202-6202
8" Semi-Machined Threaded Back Plate with 2-3/8"- 6 TPI FOR 8" 3-JAW AND 4-JAW LATHE CHUCKS
p/n:
202-
5900
Related products
THREADED BACK PLATE 8" Semi-Machined 1-3/4-8 TPI FOR 8" LATHE CHUCK
p/n: 202-
6161
8" D1-3 Fully Machined Back Plate For 8" 3 and 4 Jaw Self Centering Chucks
p/n:
202-6153
8" D1-4 Fully Machined Back Plate For 8" 3 and 4 Jaw Self Centering Chucks
p/n:
202-
6154
Related products
8" D1-6 Fully Machined Back Plate For 8" 3 and 4 Jaw Self Centering Chucks
p/n: 202-
6155
8" D1-5 Lathe Chuck Adapter Plate Semi-machined for 8" Plain Back lathe chuck
p/n:
202-5455
SHARS 7/16" Self-Ejecting Lathe Chuck Key
p/n:
202-
2032
SHIPPING: UPS Ground
Buyer pays
ACTUAL UPS shipping & insurance, and a .00 handling fee
for this item to be shipped to all states within the continental United States. Hawaii, Alaska & and other United States Territories will ship via UPS BLUE. Canada will pay actual shipping costs plus duty fees via UPS.
We can combine other auctions or store items to save on shipping. You may ask for freight cost before buying tools. Shipment will be made the same day as your payment is received and an UPS tracking number will be email to you. If your order is being shipped to an address outside of the United States, local consumer tax and/or customs duty , brokerage charges may apply and the package's recipient may need to pay these to clear customs.
PAYMENT:
We accept  VISA, MasterCard and E-Check on PayPal.com
Illinois resident adds 8% sales tax.
RETURNS:
If the item stated as brand new is found defective on arrival or incorrect item was shipped, buyer understands that the product will be repaired or replaced at seller's discretion, and be given a reasonable amount of time. Buyer is responsible for return shipping costs and insurance. Warranties are offered by the manufacturer and will be honored by the manufacturer. All shipping and handling fees will not be returned in any case.